Overview:.
Details: |
Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
Index:
| 17 |
Headerfile:
| snvt_sc.h |
SC_NUL | -1 | Invalid value. |
SC_RECALL | 0 | Recall a specified scene. |
SC_LEARN | 1 | Store the current setting in the specified scene. |
SC_DISPLAY | 2 | Display the current scene. |
SC_GROUP_OFF | 3 | Report current group is off. |
SC_GROUP_ON | 4 | Report current group is on. |
SC_STATUS_OFF | 5 | Report current status is off. |
SC_STATUS_ON | 6 | Report current status is on. |
SC_STATUS_MIXED | 7 | Report current status is mixed. |
SC_GROUP_STATUS | 8 | Get group status. |
SC_FLICK | 9 | Toggle state off and then on. |
SC_TIMEOUT | 10 | Report a timeout occured. |
SC_TIMEOUT_FLICK | 11 | Report a timeout occured for a flick warning. |
SC_DELAYOFF | 12 | Set the state to off after a delay. |
SC_DELAYOFF_FLICK | 13 | Flick and then set the state to off after a delay. |
SC_DELAYON | 14 | Set the state to on after a delay. |
SC_ENABLE_GROUP | 15 | Enable the current group. |
SC_DISABLE_GROUP | 16 | Disable the current group. |
SC_CLEANON | 17 | Recall the cleaning scene. |
SC_CLEANOFF | 18 | Restore the previous scene. |
SC_WINK | 19 | Toggle to the opposite state and then restore the state. |
SC_RESET | 20 | Restore the factory default scene table. |
SC_MODE1 | 21 | Manufacturer-specific mode 1. |
SC_MODE2 | 22 | Manufacturer-specific mode 2. |
SC_MODE3 | 23 | Manufacturer-specific mode 3. |
Used by:
| SNVT_scene |